Home Skip to main content

Research Reports
Filter by Keyword

30 report(s) found with maintenance in the keywords field
1 - 10 of 30 1 2 3 Next Page
   

Bridge inspection data is an essential step in the bridge asset management operation and the bridge management system. As such, a reliability-based, holistic framework was proposed to effectively collect reliable data and perform data fusion and information fusion of sensory data used for element-level...

 

This report presents the feasibility of a novel anchor system that mitigates the end-peeling of carbon fiber reinforced polymer (CFRP) sheets used for strengthening reinforced concrete beams. Contrary to conventional anchoring methods, CFRP sheets are embedded inside the pre-grooved concrete and covered...

 

Reinforced concrete bridge wall piers constructed using older codes perform inadequately during strong earthquakes; deficiencies include short reinforcement lap splices, insufficient steel reinforcement ratios in the longitudinal and transverse direction, and inadequate seismic detailing. Three half-scale...

 

In Wyoming, most county paved roads were built decades ago without following minimum design standards. However, the recent increase in industrial/mineral activities in the state requires developing an efficient pavement management system (PMS) for local paved roads. The new PMS which is currently being...

 

This report presents a research program studying the grooved bonding schemes of composite sheets (carbon fiber reinforced polymer, CFRP) for rehabilitating concrete members. The first phase of the research presents the efficacy of functional periodicity on controlling the occurrence of interfacial failure...

 

Precast prestressed double-tee girders are common on county bridges in South Dakota because of the ease of construction, short construction time, and low cost. However, the longitudinal joints of these bridges are rapidly deteriorating, imposing girder replacement after only 45 years of service. Currently...

 

A high-dimensional clustering-based sampling method for roadway asset condition inspection is proposed in this study. The method complements existing literature by selecting sample roadway segments that contain multiple types of assets (e.g., signage, shoulder work, pavement marking, etc.) for the accurate...

 

Federal track safety regulations require railroads to inspect all tracks in operation as often as twice weekly. Railroad companies deploy expensive and relatively slow methods using human inspectors and expensive automated inspection vehicles to inspect and monitor their rail tracks. The current practices...

 

Highway project selection and scheduling are traditionally treated as two separate problems in the literature. It is critical to investigate how to select and schedule M&R projects in a way that can maximize their benefit or effectiveness while minimizing the traffic impacts of work zones across project...

 

A model of investment in basic track components is estimated from 1985-2008 data for Class I railroads. Network size is measured in miles of road (MOR), while traffic is measured in revenue gross ton-miles (RGTM). In addition to MOR and RGTM, the model includes railroad indicator and time variables....

 
1 2 3 Next Page
NDSU Dept 2880P.O. Box 6050Fargo, ND 58108-6050
(701)231-7767ndsu.ugpti@ndsu.edu