|
|
MPC Research Reports
Filter by Keyword12 report(s) found with temperature in the keywords field Asphalt mixtures were collected from seven field projects and distributed to different laboratories to determine their potential for cracking. Samples were prepared in the lab for testing at two conditions: low, in-service temperatures using the bending beam rheometer device based on AASHTO TP-125 and... An evaluation of the ability of the BBR (Bending Beam Rheometer) as a test to determine changes in the low temperature properties of asphalt mixture parameters was conducted, along with the possible implications of adopting this test for low temperature pavement performance. It was found that the creep... The use of Carbon Fiber Reinforced Polymers (CFRP) for the repair of civil infrastructure has been on the rise. Most studies have focused on the effect of CFRP to increase the stiffness and strength of reinforced concrete beams or columns. Limited attention has been given to the effect of CFRP on mitigating... For this research, sensors were used to investigate the differences in prestress losses and temperature gradients in a concrete deck bulb tee girder bridge. The Millville Bridge was built as an access point to the Ridgeline High School in Millville, Utah. The bridge was built in 2016 and presently supports... Field samples were obtained from cores taken from multiple roads around the Salt Lake Valley in Utah and prepared for BBR testing. The response of field cores showed that even though the same binder grade used in the region was the same, the resulting mixtures have significant differences in creep moduli... This report is Phase II of a previous MPC research project (MPC 02-136) that developed a computer model using a transient, two-dimensional finite volume approach to mathematically describe the thermal response of asphalt pavements due to thermal environmental conditions on an hourly basis. The main objective... This report describes the results of examining the effects of weather exposure conditions on the connection details of the open deck timber trestle bridge. As an exploratory experimental study, the time dependent mechanical effects of moisture, temperature and humidity on a particular connection detail... Fluctuation in temperatures significantly affects pavement stability and the selection of asphalt grading to be used in pavements. Ability to accurately predict the asphalt pavement temperature at different depths and horizontal locations based on ambient air temperatures will greatly help pavement engineers... This project used field and laboratory evaluations to study the possibility of incorporating bottom ash in asphalt mixes. A pavement test section was constructed for the field portion of the project. The laboratory evaluations involved design and accelerated testing of control and bottom ash asphalt... This report examines the feasibility of using the thermal stress restrained specimen test to evaluate low temperature cracking in asphalt pavement mixes. Data were collected from laboratory and field evaluations. Various mixing, aging, and compaction methods were used to prepare test samples with materials... |
