Home Skip to main content

Research Reports
Filter by Keyword

50 report(s) found with performance in the keywords field
1 - 10 of 50 1 2 3 4 5 Next Page
   

Longitudinal joints in Portland Cement Concrete (PCC) pavement slabs require tie (dowel) bars to control joint opening resulting from thermal stresses. Inspections of PCC pavements by the South Dakota Department of Transportation using ground penetrating radar revealed that it is common for tie bars...

 

Fourteen Thin Lift Treatments (TLTs) in Utah's Department of Transportation (UDOT) Region 2 were evaluated over a five-year period in order to assess their performance. Surface distress data was quantified using Pavement Condition Indices (PCIs), and Remaining Service Life (RSL) were estimated following...

 

An evaluation of the ability of the BBR (Bending Beam Rheometer) as a test to determine changes in the low temperature properties of asphalt mixture parameters was conducted, along with the possible implications of adopting this test for low temperature pavement performance. It was found that the creep...

 

Studies of self-regulation suggest that monitoring is essential for task performance and the attainment of goals. Research was conducted to investigate factors affecting the monitoring of driving and driving safety. Participants drove on a simulator course while discussing emotional topics or daily routines....

 

Precast prestressed double-tee girders are common on county bridges in South Dakota because of the ease of construction, short construction time, and low cost. However, the longitudinal joints of these bridges are rapidly deteriorating, imposing girder replacement after only 45 years of service. Currently...

 

Innovative intersections and interchanges have proliferated in the State of Utah over the past several years. Continuous flow intersections and diverging diamond interchanges seem to offer improved traffic performance and safety due to their innovative designs. However, there are no clearly defined guidelines...

 

To facilitate the implementation of Mechanistic-Empirical Pavement Design Guide in Wyoming, this research investigated the relationships between subgrade resilient modulus (Mr) and the dynamic cone penetration and the standard penetration test results, selected three best subgrade Mr predictive models...

 

Building upon the development of a measure of safety culture based on a simplified two-factor model of meaning and behavior, a further validation study of the safety culture instrument was undertaken. The Safety Culture Assessment Survey (SCAS) was administered to a large regional railroad organization...

 

The statewide driver traffic safety survey provides baseline metrics for the Safety Division and others to use in understanding perceptions and self-reported behaviors related to focus issues. A core set of questions addresses nationally agreed upon priorities including seat belts, impaired driving...

 

This report describes methods that potentially can be incorporated into the performance monitoring and planning processes for freeway performance evaluation and decision making. Reliability analysis was conducted on the selected I-15 corridor by employing congestion frequency as the performance measure....

 
1 2 3 4 5 Next Page
NDSU Dept 2880P.O. Box 6050Fargo, ND 58108-6050
(701)231-7767ndsu.ugpti@ndsu.edu