|
|
Research Reports
Filter by Keyword12 report(s) found with steel in the keywords field This study evaluates the seismic performance of circular concrete-filled tube (CCFT) columns in accelerated bridge construction (ABC) projects. CCFT components are considered of interest for bridges subjected to seismic forces due to their efficient structural behavior under combined axial and bending... Steel bridges with reinforced concrete substructures and steel superstructures are considered to have superior performance under earthquakes when compared with their reinforced concrete counterpart. Such performance reputation stems from the fact that few steel bridges have been subjected to strong ground... Bridge expansion joints are a particularly troublesome component of bridges and many departments of transportation (DOTs) are looking for a solution to deteriorating expansion joints on highway bridges. Bridge expansion joints create a break in the structural continuity of a bridge, allowing clogging... This study aims to investigate the age-dependent changes in flexural and fracture properties of fiber-reinforced concrete (FRC) used in the design of thin overlay pavements. Four different types of steel or polypropylene macro-fibers with different dimensions and different fiber volume contents (0%... Ductile fracture has been identified as the predominant mode of failure for structural elements under extreme loads and the prediction of such represents considerable challenges. Until recently, ductile fracture of metals has been recognized to be dependent on both stress triaxiality and Lode angle parameter.... Roadside barriers are the primary structural safety devices on surface roads. They can be made from any material as long as they can absorb the energy involved in an impact scenario. One material that has that potential is Ipe, which is a hardwood material that has relatively high strength compared with... This report presents a two-phase research program studying i) galvanic current influencing deterioration of carbon fiber reinforced polymer (CFRP) sheets bonded to a steel substrate and ii) electrochemical reaction for steel beams strengthened with CFRP. The first phase of the research presents an experimental... Simple-made-continuous (SMC) steel bridges are a relatively new innovation in steel bridge design. The SMC concept is a viable solution for steel bridges to recover market share of the bridges constructed in the United States. The majority of SMC bridges currently in use are constructed with concrete... This research focuses on finding a method for creating cost effective and innovative steel bridges in Colorado. The design method that was discovered to create this cost efficiency was designing the beams as simply supported for non-composite dead loads, beam weight and wet concrete, and then making... High Performance Steel (HPS) is a superior material with higher yield strength, improved weldability, greater levels of toughness, and improved weathering resistance that can lead to more economical bridges than conventional steel bridge designs. AASHTO Load and Resistance Factor Design (LRFD) provisions... |
