|
|
Research Reports
Filter by Keyword6 report(s) found with paving in the keywords field 1 - 6 of 6 Moisture-induced damage (stripping) is a major distress in asphalt pavements. This study was undertaken to evaluate the effects of chemical Warm Mix Asphalt (WMA) additives, Reclaimed Asphalt Pavement (RAP), Anti-Stripping Agent (ASA), and hydrated lime on moisture-induced damage potential of asphalt... This study addresses both structural and surfacing issues associated with unpaved roads subjected to heavier traffic applications. Different gravel types with various dust suppressants including recycled asphalt pavement (RAP) and soil stabilizers were evaluated in an attempt to provide the best road... Current pavement design based on the AASHTO Design Guide uses an empirical approach from the results of the AASHO Road Test conducted in 1958. To address some of the limitations of the original design guide, AASHTO developed a new guide: Mechanistic Empirical Pavement Design Guide (MEPDG). This guide... The study focuses on ascertaining information on user willingness-to-pay and their perceptions of funding for improving gravel roads which support freight transportation service in rural areas. The research considers safety, road type, and maintenance valuation for both gravel and paved road surfaces.... The feasibility of using the Georgia Loaded-Wheel Tester (GLWT) to predict rutting in the laboratory was investigated in this research. This research was performed in two phases. The first phase consisted of modifying the GLWT to handle 15.2 cm (6 in) cores, developing a laboratory compaction procedure... This report describes a study jointly conducted by the University of Wyoming and the Wyoming Department of Transportation to examine the effect of construction Profilograph Index (PI) values on long-term roughness measurements of concrete pavements. The objectives of this study were to determine if increased... |
