|
|
Research Reports
Filter by Keyword6 report(s) found with compressive strength in the keywords field 1 - 6 of 6 The first part of the study presents the time-dependent interfacial behavior of near-surface-mounted (NSM) carbon fiber reinforced polymer (CFRP) strips bonded to a concrete substrate using inorganic resins. Four types of bonding agents (mortar, polyester-silica, ultra-high performance concrete (UHPC)... This report presents the feasibility of a novel anchor system that mitigates the end-peeling of carbon fiber reinforced polymer (CFRP) sheets used for strengthening reinforced concrete beams. Contrary to conventional anchoring methods, CFRP sheets are embedded inside the pre-grooved concrete and covered... This study evaluates the seismic performance of circular concrete-filled tube (CCFT) columns in accelerated bridge construction (ABC) projects. CCFT components are considered of interest for bridges subjected to seismic forces due to their efficient structural behavior under combined axial and bending... The objectives of this study were to assess geotechnical properties of mine waste amended with fly ash and evaluate reuse of fly ash amended mine waste as road construction material. Three types of fly ash and one type of cement were used as cementitious binder. Natural and synthetic (i.e., laboratory... This research focuses on the beneficial utilization of Spray Dryer Ash (SDA) and investigates its performance in concrete for structural and transportation applications. Based on the challenges associated with disposal of all coal ashes, and SDA in particular, and the economic and environmental costs... This paper presents results of laboratory tests conducted to determine the effects of additives on the stabilization of unpaved road surfaces. Laboratory tests can be an efficient means of determining which additive will best stabilize a given unpaved road surface, but correlation between laboratory... |
