Home Skip to main content

Research Reports
Filter by Author

10 report(s) found for Pedro Romero-Zambrana
1 - 10 of 10
 

This report documents the effort to develop a practical relation between the cracking tolerance index and portions of the dynamic modulus curves of asphalt mixtures. A review of practices used to create asphalt mixtures' dynamic modulus master curves, based on NCHRP reports and other relevant literature...

The purpose of this research project was to investigate and determine the reasons for premature deterioration of the geogrid-reinforced pavement system on the section of SR-10 between Muddy Creek and Emery, Utah. The statistical analyses and evaluations indicate that the structural design of the primary...

This report documents the effort to develop a practical relation between the cracking tolerance index and portions of the dynamic modulus curves of asphalt mixtures. A review of practices used to create asphalt mixtures dynamic modulus master curves, based on NCHRP reports and other relevant literature...

This report describes the research efforts aimed at determining the repeatability of the IDEAL-CT test for use as part of the balanced asphalt mix design process. Three mixes in common production in northern Utah were investigated by three different labs experienced in performance testing. Within-lab...

This document presents the continuous effort to develop mechanical tests that can relate to the expected performance of asphalt mixtures once placed in the field. During a previous research project, asphalt mixtures of different compositions were collected from different locations across the state of...

Asphalt mixtures were collected from seven field projects and distributed to different laboratories to determine their potential for cracking. Samples were prepared in the lab for testing at two conditions: low, in-service temperatures using the bending beam rheometer device based on AASHTO TP-125 and...

A study was conducted in which cores were taken from pavements three years after construction. The flexibility index (FI) of the cores, a parameter that relates to intermediate temperature cracking, was measured in the lab and compared to the known values of the same material obtained during constructions....

Fourteen Thin Lift Treatments (TLTs) in Utah's Department of Transportation (UDOT) Region 2 were evaluated over a five-year period in order to assess their performance. Surface distress data was quantified using Pavement Condition Indices (PCIs), and Remaining Service Life (RSL) were estimated following...

An evaluation of the ability of the BBR (Bending Beam Rheometer) as a test to determine changes in the low temperature properties of asphalt mixture parameters was conducted, along with the possible implications of adopting this test for low temperature pavement performance. It was found that the creep...

Field samples were obtained from cores taken from multiple roads around the Salt Lake Valley in Utah and prepared for BBR testing. The response of field cores showed that even though the same binder grade used in the region was the same, the resulting mixtures have significant differences in creep moduli...

NDSU Dept 2880P.O. Box 6050Fargo, ND 58108-6050
(701)231-7767ndsu.ugpti@ndsu.edu