Home Skip to main content

Research Reports
Report Details

Title:Fatigue Testing of Wood-Concrete Composite Beams
Authors:Jeno Belogh and Rebecca Atadero
University:Colorado State University
Publication Date:May 2013
Report #:MPC-13-252
Project #:MPC-325
TRID #:01482123
Keywords:beams, bridge design, composite materials, concrete, failure analysis, fatigue tests, load tests, timber, wood
Type:Research Report – MPC Publications

 

Abstract

This report describes research performed in coordination with work at the University of Stuttgart, attempting to establish the S-N curve for fatigue loading of notched wood-concrete connections based on low/high-cycle, repeated loading tests. Experimental results are obtained on fourteen 1524 mm span composite beam specimens in which the wood and concrete are interconnected by embedded anchor screws at the notch locations. Five specimens are loaded statically while the others are cycled to failure with a maximum to minimum cyclic load ratio of 10. Points on the S-N curve are determined for three levels of the maximum load as a function of the average static failure load. Typical observed failure modes are block-shear of the wood at the notch and tension failure of the wood at mid-span. As a result, the obtained S-N curve could be proposed for future consideration in drafting design codes addressing the timber-concrete composite structures for bridges.

How to Cite

Belogh, Jeno, and Rebecca Atadero. Fatigue Testing of Wood-Concrete, MPC-13-252. North Dakota State University - Upper Great Plains Transportation Institute, Fargo: Mountain-Plains Consortium, 2013.

NDSU Dept 2880P.O. Box 6050Fargo, ND 58108-6050
(701)231-7767ndsu.ugpti@ndsu.edu