Home Skip to main content

Research Reports
Filter by Keyword

119 report(s) found with highway in the keywords field
1 - 10 of 119 1 2 3 4 5 6 ...12 Next Page
   

Despite similarities to the US in terms of transportation, land use, and culture, Australia kills 5.3 people per 100,000 population on the roads each year, as compared to the US rate of 12.4. Similar trends hold when accounting for distance driven and the number of registered cars. This paper seeks to...

 

This study presents the application of the Highway Safety Manual (HSM) to rural state highways in South Dakota and provides important guidance and empirical results regarding how to calibrate HSM models. Calibration guidelines have been developed to facilitate future calibration activities. The calibration...

 

A study was conducted to develop recommendations for short span concrete structure type selection based on analyses of existing structure costs and performance data from South Dakota roadway systems. Through a combination of data sources, including the PONTIS database, local owner and inspector surveys...

 

Calcium sulfoaluminate (CSA) cement was used to cast a prestressed voided deck slab bridge girder. The rapid-set properties of CSA cement allowed the initial concrete strength to reach the required 4300 psi needed in order to cut the prestressing strands 6.5 hours after casting. Prestress losses were...

 

Tribal communities recognize the need to improve roadway safety. A five-step methodology has been developed by the Wyoming Technology Transfer Center (WYT2/LTAP) to improve roadway safety on reservations. This methodology was initially implemented on the Wind River Indian Reservation (WRIR), which led...

 

Tribal communities recognize the need to improve roadway safety. A five-step methodology has been developed by the Wyoming Technology Transfer Center (WYT2/LTAP) to improve roadway safety on Indian reservations. This methodology was initially implemented on the Wind River Indian Reservation (WRIR), which...

 

Tribal communities recognize the need to improve roadway safety. A five-step methodology has been developed by the Wyoming Technology Transfer Center (WYT2/LTAP) to improve roadway safety on reservations. This methodology was initially implemented on the Wind River Indian Reservation (WRIR), which led...

 

A high-dimensional clustering-based sampling method for roadway asset condition inspection is proposed in this study. The method complements existing literature by selecting sample roadway segments that contain multiple types of assets (e.g., signage, shoulder work, pavement marking, etc.) for the accurate...

 

The roadside area where fixed-object hazards are explicitly minimized is called the clear zone, which became standard design practice soon after the 1966 Congressional hearings on road and automobile safety. Mounting evidence, however, is beginning to cast doubt on what we think we know about the impact...

 

Innovative intersections and interchanges have proliferated in the State of Utah over the past several years. Continuous flow intersections and diverging diamond interchanges seem to offer improved traffic performance and safety due to their innovative designs. However, there are no clearly defined guidelines...

 
1 2 3 4 5 6 ...12 Next Page
NDSU Dept 2880P.O. Box 6050Fargo, ND 58108-6050
(701)231-7767ndsu.ugpti@ndsu.edu