|
MPC Research Reports Filter by Keyword11 report(s) found with highway bridges in the keywords field The use of precast concrete in bridge construction has been abundant in recent years because of its efficiency and superior quality control. Precast components are connected at the bridge site to reduce construction time and traffic disturbance. The Grouted Splice Sleeve (GSS) connection provides good... A study was conducted to develop recommendations for short span concrete structure type selection based on analyses of existing structure costs and performance data from South Dakota roadway systems. Through a combination of data sources, including the PONTIS database, local owner and inspector surveys... Calcium sulfoaluminate (CSA) cement was used to cast a prestressed voided deck slab bridge girder. The rapid-set properties of CSA cement allowed the initial concrete strength to reach the required 4300 psi needed in order to cut the prestressing strands 6.5 hours after casting. Prestress losses were... Millions of cubic yards of concrete and steel used to support the U.S infrastructure may result in a significant negative impact on the environment. CO2 released by construction processes, as well as material production, is taking a substantial toll on the environment. This study seeks to develop a system... Crashes of heavy trucks with bridge columns are random events with low probability of occurrence. In spite of the low odds, previous collision events have resulted in catastrophic partial or full collapse of bridges. AASHTO-LRFD Bridge Design Specifications requires bridge columns to be designed for... Expanded Polystyrene (EPS) geofoam is a super-lightweight material used in various transportation engineering applications. It has been particularly successful as an ultra-lightweight alternative to earthen, geosynthetic reinforced soil (GRS), and mechanically-stabilized earth (MSE) embankment systems... Concrete bridge decks are directly exposed to daily traffic loads and may experience some surface cracking caused by excessive stress or fatigue accumulation, which requires repair or replacement. Among typical bridges in North America, bridge decks are considered the most expensive component to construct... The long-term objectives of this project were to develop and validate an instrumentation package for structural health monitoring of bridges subjected to overweight trucks and to develop plans for field deployment of the instrumentation on a pilot scale. Ultimately, the objective is to accurately correlate... Depending on the location, highway bridges can often support considerable amounts of traffic. Due to the limitations on current earthquake forecasting techniques, a normal amount of traffic will also typically remain on a bridge when an earthquake occurs. In addition to traffic, scour effects are also... This research study focused on the long-term and repeated load behavior of wood-concrete composite beams in which the wood layer is composed of recycled utility poles. Previous research studies have found this type of a beam to have high efficiency and to be a potentially viable replacement for short...
|