Research Reports
Filter by Keyword
This report presents a two-part research program examining the performance of constructed bridges in a cold region, represented by those in the State of North Dakota, and the behavior of concrete members strengthened with carbon fiber reinforced polymer (CFRP) composite sheets in such a service condition....
This document presents the application of the Highway Safety Manual (HSM) for rural local two-lane two-way highway segments in South Dakota. The calibration was based on three-year (2009-2011) crash data from 657 roadway segments constituting more than 750 miles of roadways. The calibration process includes...
Depending on the location, highway bridges can often support considerable amounts of traffic. Due to the limitations on current earthquake forecasting techniques, a normal amount of traffic will also typically remain on a bridge when an earthquake occurs. In addition to traffic, scour effects are also...
This report describes research performed in coordination with work at the University of Stuttgart, attempting to establish the S-N curve for fatigue loading of notched wood-concrete connections based on low/high-cycle, repeated loading tests. Experimental results are obtained on fourteen 1524 mm span...
This research compares safety, measured by expected crash frequency and severity, on road segments where design exceptions were approved and constructed to similar road segments where no design exceptions were approved or constructed. Data were collected for design exceptions in Utah in the years 2001...
This research focuses on finding a method for creating cost effective and innovative steel bridges in Colorado. The design method that was discovered to create this cost efficiency was designing the beams as simply supported for non-composite dead loads, beam weight and wet concrete, and then making...
Current pavement design based on the AASHTO Design Guide uses an empirical approach from the results of the AASHO Road Test conducted in 1958. To address some of the limitations of the original design guide, AASHTO developed a new guide: Mechanistic Empirical Pavement Design Guide (MEPDG). This guide...
As more Recycled Asphalt Pavement (RAP) becomes available to use in roadways, The Wyoming T2/LTAP Center and two Wyoming Counties investigated the use of RAP in gravel roads. The Wyoming DOT and the Mountain-Plains Consortium funded this study. The investigation explored the use RAP as a means of dust...
Current pavement design methodology based on the AASHTO Design Guide uses an empirical approach based on the results of the AASHTO Road Test conducted in 1958. But limitations of the current guide led AAHSTO to publish the new Mechanistic Empirical Pavement Design Guide (MEPDG), which combines mechanistic...
This research was undertaken to: 1) design and construct a wall and basic subassembly of an emergency storm shelter comprised entirely of wood that could resist a "missile" impact at 100 mph or multiple impacts at 80 mph; 2) study the difference in impact response for various specimen configurations...