|
|
Research Reports
Filter by Author25 report(s) found for Richard M. Gutkowski This report details the outcomes of shear spiking two open-deck, timber trestle railroad bridges and examining the effectiveness under applied loading. The bridges were made available to the researchers by the Union Pacific Railroad and were located in their Southern Region. The first site was located... This research was undertaken to: 1) design and construct a wall and basic subassembly of an emergency storm shelter comprised entirely of wood that could resist a "missile" impact at 100 mph or multiple impacts at 80 mph; 2) study the difference in impact response for various specimen configurations... This research study focused on the long-term and repeated load behavior of wood-concrete composite beams in which the wood layer is composed of recycled utility poles. Previous research studies have found this type of a beam to have high efficiency and to be a potentially viable replacement for short... This research study examined the effectiveness of the fiber reinforced polymer (FRP) spikes in repairing naturally damaged and deteriorated railroad bridge chords. Past research has shown that this process can be quite effective in improving the effective stiffness of railroad chord members that were... A wood-concrete composite bridge constructed of recycled utility poles is a potentially cost effective solution to repair a portion of the 108,647 rural bridges that have been deemed functionally obsolete or structurally deficient and have a span under thirty feet in length. This research project focuses... For this study, eight full-size railroad bridge timber stringers were intentionally damaged by saw cuts, to mimic deterioration, after which they were strengthened through the process of shear spiking. The stringers were then durability loaded up to 25,000 cycles after which the majority of the sample... A structural concept as an alternative to conventional bridge guardrail system for application in timber bridges was conceived in prior related research on an innovative timber bridge system. This paper presents the results of the subsequent study, which was conducted after making the improvements. The... This study presents the results of the most recent phase of laboratory research. The effects of support movements observed in the field test were examined by physical laboratory testing and computer-based structural modeling using AxisVM software [Inter-CAD. Kft, 2004]. The goal of this research was... Investigations into the effects of the addition of vertically-oriented shear spikes with fiberglass reinforced polymer rods have shown that the shear spikes increased the effective stiffness of the stringers of a full-scale timber bridge chord specimen. This was previously found to be true on dimension... A testing facility for temporary longitudinal barriers was constructed at Colorado State University's Engineering Research Center which allows manufacturer's the opportunity to test their safety barriers prior to full-scale federal testing. This facility enables manufacturers to subject their products... |
