|
|
Research Reports
Filter by Keyword6 report(s) found with fatigue tests in the keywords field 1 - 6 of 6 Precast prestressed double-tee girders are common on county bridges in South Dakota because of the ease of construction, short construction time, and low cost. However, the longitudinal joints of these bridges are rapidly deteriorating, imposing girder replacement after only 45 years of service. Currently... The South Dakota Department of Transportation (SDDOT) allows the use of precast double-tee bridges in counties because they are economical and fast in construction. Alternative durable prefabricated bridge systems are needed to provide more options to local governments. The present study was carried... Simple-made-continuous (SMC) steel bridges are a relatively new innovation in steel bridge design. The SMC concept is a viable solution for steel bridges to recover market share of the bridges constructed in the United States. The majority of SMC bridges currently in use are constructed with concrete... This paper presents the results of an experimental study on the fatigue performance of RC beams strengthened with different externally bonded CFRP systems. Seven specimens were fabricated; three had no CFRP; the remaining four had one of two CFRP systems. The objective of this study was to determine... The overall project is to demonstrate the effectiveness of shear spiking (technique already developed through a previous project). Many timber railroad bridges are deficient but it is too costly to replace them; hence, inexpensive repair techniques are needed. The proposed project will provide the necessary... This report describes research performed in coordination with work at the University of Stuttgart, attempting to establish the S-N curve for fatigue loading of notched wood-concrete connections based on low/high-cycle, repeated loading tests. Experimental results are obtained on fourteen 1524 mm span... |
